New York Subway Map

walls. This room is fitted with a set of eight tanks, each with a capacity of 200 gallons. As the barrels filled with oil and other combustible material are brought into this room by the telpherage system they are deposited on elevated platforms, from which their contents can be tapped directly into the tank. [Sidenote: _Blacksmith Shop_] The final division of the west shops is that in the northeastern corner, which is devoted to a blacksmith shop. This shop contains six down-draught forges and one drop-hammer, and is also served by the telpherage system. [Sidenote: _Transfer Table_] Connecting the main shops with the storeroom and blacksmith or west shops is a rotary transfer table 46 feet 16-13/16 inches long and with a run of 219 feet. The transfer table is driven by a large electric motor the current being supplied through a conductor rail and sliding contact shoe. The transfer table runs on two tracks and is mounted on 33-inch standard car wheels. [Sidenote: _Employees_] The south side of the shop is fitted with offices for the Master Mechanic and his department. The working force will comprise about 250 in the shops, and their lockers, lavatories, etc., are located in the south bay.